- Save 37%
Dremel 115 7.9mm High Speed Cutter 2 Pack 26150115AC
High Speed Cutters work well for detailed material removal in applications.
Ideal for shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
Use on softer materials like wood, plastic and soft metals such as aluminium, copper, and brass.
Two accessories included.
Cylindrical shaped Dremel High Speed Cutter (7.9mm) for detailed carving and engraving applications.
The Dremel High Speed Cutter 7.9mm (115) work well for material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying making tapered holes or freehand routing. The Dremel High Speed Cutter 7.9mm (115) is made of high-grade steel, perfect for use on softer materials like wood, plastic and soft metals such as aluminium, copper, and brass. The cylinder shape allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees. With High Speed Cutters, a less aggressive, more frequent pass will always produce better results than pushing too hard or forcing the tool through the material. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
The Dremel High Speed Cutter 7.9mm (115) contains two accessories in a pack.
Technical specifications:
• Shank diameter: 3.2 mm
• Working diameter: 7.8 mm
• Accessory length: 38.0 mm
• Width: 8.0 mm
• Length: 8.0 mm
• Height: 38.0 mm
• Maximum RPM: 30.000 1/min• Maximum RPM: 35.000 1/min
High Speed Cutters work well for detailed material removal in applications.
Ideal for shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing.
Use on softer materials like wood, plastic and soft metals such as aluminium, copper, and brass.
Two accessories included.
Cylindrical shaped Dremel High Speed Cutter (7.9mm) for detailed carving and engraving applications.
The Dremel High Speed Cutter 7.9mm (115) work well for material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying making tapered holes or freehand routing. The Dremel High Speed Cutter 7.9mm (115) is made of high-grade steel, perfect for use on softer materials like wood, plastic and soft metals such as aluminium, copper, and brass. The cylinder shape allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees. With High Speed Cutters, a less aggressive, more frequent pass will always produce better results than pushing too hard or forcing the tool through the material. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
The Dremel High Speed Cutter 7.9mm (115) contains two accessories in a pack.
Technical specifications:
• Shank diameter: 3.2 mm
• Working diameter: 7.8 mm
• Accessory length: 38.0 mm
• Width: 8.0 mm
• Length: 8.0 mm
• Height: 38.0 mm
• Maximum RPM: 30.000 1/min• Maximum RPM: 35.000 1/min
