Soudal T-Rex Power – Fast Grab Steel Grey

T-Rex Power Fast Grab is a high quality, neutral, elastic, 1-component adhesive sealant based on SMX®  Polymer with a very high initial tack. T-Rex Power Fast Grab is a high strength sealant / adhesive that can hold 320kg’s per 10cm2 with a 1 Second immediate grab

Product:
Soudal T-Rex Power is a high quality, single component SMX polymer based adhesive sealant with a high initial tack

Characteristics:
High performance mechanical properties
Combines high stiffness with very high bond strength
High green strength, quick build-up of end strength, high sheer strength after full cure
Does not contain isocyanates, silicone, solvent
Flexible elastic rubber – movement accommodation up to 20%
No bubble formation within sealant (in high temperature and humidity applications)
Very easy to tool and finish
Colour stability and UV resistance
Can be painted wet-on-wet in paint trains with most industrial paints
Withstands all climatic conditions
Minimal health and safety considerations

Applications:
Structural elastic bonding in the building and metal working industry
Structural bonding applications in the automotive industry (cars, coaches, caravans, marine (non critical areas), trains)
Elastic bonding of panels, profiles and other pieces on the most common substrates

Bonding:
Soudal T-Rex Power has an excellent adhesion on almost all substrates. Soudal T-Rex Power has been tested on the following metal surfaces: steel, AlMgSi1, brass, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403.
Plastics that were tested include:
polystyrene, polycarbonate (Makrolon®), PVC, polyamide, glass fibre reinforced epoxy and polyester (GRP).

Features & Benefits
Fast grab reducing the need for initial support
Fast curing
Good extrudability
High shear strength after full cure (no primer)
Stays elastic after curing and very sustainable
No odour
Can be painted with water based systems
Good weather and UV resistance
Does not contain isocyanates and no silicones
Good adhesion on slightly moist substrates
Water potable

Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test